Skip to content
Freelton Lock ExpertsRequest a visit
Open 24/7(289) 203-2070Call now
Three rectangular door-handle sets with keyholes in black, silver-colored and gold-colored finishes standing on a countertop. — Commercial Rekeying, Hamilton

Commercial · Hamilton

Commercial Rekeying

The renovation is finished and the contractors have gone, along with the loaner keys they used for six weeks. Trades, delivery drivers and an inspector all came through, and the front door still answers to the key that was passed around the site.

Call now · open 24/7(289) 203-2070

Request a visit

In plain words

Losing a master key exposes every door it opened, and a commercial rekey brings that exposure back to zero. The locksmith first works out which level the missing key sat at: a single change key affects one or two cylinders, while a master reaches every lock in its group. Only the affected cylinders are repinned, which keeps the rest of the system intact and the response proportionate. Where a keying chart exists the work is precise; where the chart has been lost, the visit begins by reading and recording the existing cylinders so the new plan starts from facts rather than memory.

Sound familiar?

Two people left over the summer and the keys they handed back came up one short. Nobody is sure whether the missing key was for the front door, the stockroom or both, and the sign-out sheet stopped being filled in a year ago.

How the visit goes

Commercial Rekeying · Hamilton

How the visit goes

Technician holding a yellow cordless drill with a thin bit beside the deadbolt and handle on a brown door.
  1. 1

    The state of the cylinders and the doors

    A cylinder about to be repinned is examined the way a mechanic looks over a part before rebuilding it. The plug should turn smoothly with the right key, the pins should spring back cleanly, and the face should be free of the green bloom that salt spray leaves on storefront hardware after a few winters. The locksmith also checks how the door closes: a strike that no longer lines up, a closer that slams, or a deadlatch that fails to catch will keep a freshly rekeyed door from locking properly. Most cylinders pass and are repinned; a worn or corroded one is pointed out so you can choose a replacement for that opening.

  2. 2

    Door by door, never a gap

    The sequence agreed at the assessment is followed on the day. The locksmith finishes one opening entirely before beginning the next: cylinder out, repinned, refitted, tested with both the new key and the old, and locked again. Only then does the next door come apart. The main entrance is usually left for last and done while someone from the business is present, so there is never a moment when the premises has a door that will not lock. Staff who are working during the visit are handed their new key before the door they use is changed, and a short note goes to anyone off shift about where to collect theirs.

  3. 3

    Telling the landlord and the alarm company

    A rekey touches a few people outside the business, and the handover covers them. If the lease asks for it, the landlord or property manager receives a key to the suite entrance and a note that the locks were changed, which keeps you onside for emergencies and inspections. The alarm monitoring company is given the updated keyholder list, and it is a good moment to change the alarm codes of anyone who no longer works there, since a key and a code usually leave together. Cleaners, the courier with after-hours access and the neighbour who watches the place on holidays each collect their new key against the register like everyone else.

In the van

  • Key gauge and decoder
  • Standard and restricted key blanks
  • Dry graphite or PTFE lubricant
  • Interchangeable cores and control key
  • Rekeyable padlocks

What affects the quote

  1. 1

    Distance to the premises

    Travel to the site is part of the call-out, and a unit in a downtown plaza and one at the end of a rural industrial road are different trips.

  2. 2

    Doors out of alignment

    A door whose cam, strike or closer needs adjusting so the freshly rekeyed cylinder throws the bolt fully is corrected during the visit, and that adjustment is a separate item.

  3. 3

    Padlocks, cabinets and mailboxes

    Small locks add up. Each padlock repinned to the door key, each cabinet keyed alike and each mailbox cylinder replaced is listed on its own so you can decide what to include.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 203-2070

Commercial Rekeying: questions

Advice · (289) 203-2070

What condition does a lock need to be in to be rekeyed?

It needs a plug that rotates without catching, pins that return under their springs, and a face free of heavy corrosion or cracks. Most commercial cylinders in daily use pass easily. Ones that are stiff, gritty or green with salt bloom can sometimes be cleaned and repinned, and the locksmith will say when a replacement for that door is the better value; the rest of the doors are rekeyed regardless.

Do I need my landlord's consent before rekeying my unit?

Read the lease, because that is where the answer lives. Commercial tenancies are governed mostly by the lease itself, and many leases require the tenant to tell the landlord when locks change, to provide a key for emergencies, or to use the landlord's approved locksmith. Doors on the building's master system, such as corridor or service doors, are normally the landlord's to change. Bring the lease to the assessment and the locksmith will sort the doors accordingly.

We are a landlord with a tenant leaving. When should the unit be rekeyed?

Between tenants is the ideal moment: the departing tenant has handed back their keys, the new one has not yet received any, and the unit is empty for the work. The incoming tenant then starts on keys nobody else has held, and the landlord's own master or emergency key is set up at the same time. Where a lease has ended in dispute, the locksmith asks to see the paperwork before changing locks on a unit that still holds a tenant's goods.

Commercial Rekeying near you

Hamilton, Ontario

Hamilton information

Town
Hamilton, Ontario
In business
22 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

61%

Older homes. About 61% of homes in Hamilton were built in 1980 or earlier, according to the 2021 Census.

Old brass keys wear thin, and a key that has bent for years finally lets go in a cold cylinder. In older housing stock this is a regular call, so the locksmith is ready to extract the piece, check the cylinder and cut a new key from the code.

56%

A mix of homes. Single-detached houses make up about 56% of homes in Hamilton (2021 Census).

Where houses and attached homes share an area, lockouts are as varied as the doors. A porch, a hallway or a shared vestibule each calls for a slightly different approach, and a locksmith used to all three arrives ready for whichever it is.

Source: Statistics Canada, 2021 Census of Population

Nearby

Open Hamilton in Google Maps

Open 24/7

Request a visit

The renovation is finished and the contractors have gone, along with the loaner keys they used for six weeks.

Call now · open 24/7(289) 203-2070
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 22 years in business